All four spars fabricated and ready to drill...when I build up the courage! Signed off by inspector on the 19 June 2000!!!
|
|
Wing Ribs completed. Three main variations to take the 'Jim Wills' three piece wing. Currently planning on retaining the 'capability' for the inter-connect, but not to incorporate it during the initial build. I am not convinced that I would use it enough to justify the extra weight/cost/complexity... | |
Tailplane completed and signed-off 7 Oct. '97. Used Epoxy and Blue foam along leading edges to cope with 'hangar-rash'. Hinges as supplied by Aviation Metalcraft. |
|
Centre-section partially complete...I plan to use the space as a baggage compartment, with the option of an auxillary bag tank when required. |